Important Notice

Infocenter will be moving to 3D Systems’ Salesforce Community on Sept. 26th, 2022. After this date, please go to to access all customer-facing and service-facing documents, including videos, software downloads and material SDSs. Note: To access service documents, you must sign into Salesforce Community.
If you have any issues, please contact the

Build Material - is a paste-like acrylic compound that is an ultraviolet (UV) curable material.

Print platform - metal surface used on which the 3D printer system builds parts. Support structures link the parts to the print platform and must be removed from the 3D printer system once complete.

Chamber Door - the chamber door prevents harmful UV radiation from escaping the build chamber during the build process. The chamber door must be closed prior to starting or resuming a print job and is locked when a build is in progress.

Debug Log - is a text file used for obtaining information for resolving potential problems that may occur with the 3D printer system.

Job Scale Percentage (Job Scale %) - is used to resize parts during the build process.

Material Delivery Module - stores and feeds the material to the 3D printer system during the build process. Each material delivery module (MDM) can hold two (2) bottles of material. The 3D printer system is equipped with two (2) support material MDMs and two (2) build material MDMs.

Material Quality Guarantee - the 3D printer system reads an encrypted RFID tag on the cartridge to communicate parameters and ensure optimum build quality.

Modeling - the 3D printer system uses materials and a print platform to create three dimensional plastic prototype prints.

Touchscreen - is used to display print job status, menu options, and command prompts for the 3D printer system.

Post Curing (Finishing) - is the final process to remove support material from parts and clean the parts to a smooth finish prior to surface finishing and coating.

Shrink Comparison Percentage (Shrink Comp %) - is used to adjust for expected shrinkage during the build so actual part dimensions more closely match actual dimensions.

.STL File - is a file format used to produce prints.

Support Material - is a wax based material that provides adhesion to the print platform and support for down facing surfaces and open volumes within the print.

Waste Material - is any support and/or uncured build material generated during a build process.

X-Axis - is the orientation of the part from left to right on the print platform.

Y-Axis - is the orientation of the part from front to back on the print platform.

Z-Axis - is the orientation of the part from up and down on the print platform.