Replacing the Particulate Carbon Filter

3D Systems’ Infocenter Moves to Salesforce

The Infocenter has been the 3D Systems portal for customer-facing and service-facing product documentation (for example videos, software downloads, and material SDSs).  

As of Sept 26, 2022, the Infocenter content will be moved to Salesforce and will be accessible through the Salesforce Community https://support.3dsystems.com/s/.

Service Documentation Only

To access service documentation, you will need to sign into Salesforce Community using your Salesforce username and password. Everyone trained and currently authorized to service a particular printer will be able to access its service documentation.

If you have any issues or need assistance, please contact the infocenterhelp@3dsystems.com.

Replacing the Particulate Carbon Filter

The carbon filter is designed to remove particulates, odors, and gasses from the build area.

Access to this filter is from the front of the machine on the right hand side. Open door, loosen the thumb screw on the door containing the filter, remove the filter, insert new filter, close door, tighten thumb screw.

NOTE: This is a customer replaceable part. Particulate Filter with Handle - P/N 310259-00.

Photo below illustrates a filter that needs to be changed.

 

Photo below illustrates a filter that is clean and new.