Some considerations when purchasing post processing equipment:
|Table Space for wax removal and part handling||Typical sizes: 48” x 30”|
|Table space for wax removal and part handling||Typical sizes: 48” x 30”|
|Flammable liquid storage container||Allocate floor space: Various sizes depending on usage|
Expect multiple 15A circuits. Depends on equipment—consult manufacturer’s documentation.
|Safety Precautions||Have equipment in place in accordance with all local/state/federal regulations.|
Here is a generalized layout which may be applicable. This is only one example and should only be used as a reference. Install and use equipment in accordance with all local/state/federal regulations.
Distillation of used solvent can be an economical and environmentally friendly choice when post processing 2500 IC printed parts. Solvent waste is generated when the support material is removed from your printed parts. This waste has to be disposed of in a manner which meets all local/state/federal regulations. Commercially available distillation units may be used to distill the solvent back into a usable form. Consider researching and purchasing a distillation unit to reuse the solvent needed to post process 2500 IC printed parts.