Facility Equipment Requirements for Post Processing VisiJet M2 ICast with IPA

3D Systems’ Infocenter Moves to Salesforce

The Infocenter has been the 3D Systems portal for customer-facing and service-facing product documentation (for example videos, software downloads, and material SDSs).  

As of Sept 26, 2022, the Infocenter content will be moved to Salesforce and will be accessible through the Salesforce Community https://support.3dsystems.com/s/.

Service Documentation Only

To access service documentation, you will need to sign into Salesforce Community using your Salesforce username and password. Everyone trained and currently authorized to service a particular printer will be able to access its service documentation.

If you have any issues or need assistance, please contact the infocenterhelp@3dsystems.com.

Some considerations when purchasing post processing equipment:

 

Facilities Description Details
Table Space for wax removal and part handling Typical sizes: 48” x 30”
Table space for wax removal and part handling Typical sizes: 48” x 30”
Flammable liquid storage container Allocate floor space: Various sizes depending on usage

Power drops

Expect multiple 15A circuits. Depends on equipment—consult manufacturer’s documentation.

Safety Precautions Have equipment in place in accordance with all local/state/federal regulations.

 

Here is a generalized layout which may be applicable. This is only one example and should only be used as a reference. Install and use equipment in accordance with all local/state/federal regulations.

Layout with solvent callout.jpg

Solvent Reclamation:

Distillation of used solvent can be an economical and environmentally friendly choice when post processing 2500 IC printed parts. Solvent waste is generated when the support material is removed from your printed parts. This waste has to be disposed of in a manner which meets all local/state/federal regulations. Commercially available distillation units may be used to distill the solvent back into a usable form. Consider researching and purchasing a distillation unit to reuse the solvent needed to post process 2500 IC printed parts.