The following items and accessories are contained in the printer package.
|NextDent 5100 Printer|
|Resin Tray - Contains the print material during part building.|
|Print Platform (x2) - The 3D-printed part adheres to the print platform during part building.|
|Catch Tray - Prevents resin spills from entering the lower build chamber, should the resin-tray membrane be punctured. This comes installed in the printer.|
|Power Cord (country specific) - To connect printer to power source. The power cord has been packaged with your printer by your reseller to ensure you receive the correct power cord for your region.|
|Resin Mixer - Used to mix the liquid NextDent resin while in the resin tray|
|Punch Tool - Used to remove the printed part from the print platform from underneath, and to clear the print-platform holes of partially cured resin.|
Carbon Filter - Prevents print-material fumes from exiting the process chamber. You will install this in the Carbon-Filter Bracket, as seen below.
|Resin Tray Garage - Used to cover a resin-filled resin tray inside or outside the printer, so as to protect it from UV-light exposure and external contaminates|
|Platform Scraper - Used to scrape any residual partially cured material off the print platform|
|Intake Filter - Keeps dust out of the printer while feeding air to the cooling fan|
|Bubble Level - Used to level the printer on the pedestal before its first use|
|Part-Cleaning Brush - Used to aid in cleaning partially cured resin off the print platform and printed part|
|Platform-Cleaning Fixture - Used to hold the print platform in a tub of solvent during platform cleaning|
|Wire Brush - Used to help clean print platforms that have run Ortho IBT or Gingiva Mask resins|