Safety Notice

3D Systems’ Infocenter Moves to Salesforce

The Infocenter has been the 3D Systems portal for customer-facing and service-facing product documentation (for example videos, software downloads, and material SDSs).  

As of Sept 26, 2022, the Infocenter content will be moved to Salesforce and will be accessible through the Salesforce Community https://support.3dsystems.com/s/.

Service Documentation Only

To access service documentation, you will need to sign into Salesforce Community using your Salesforce username and password. Everyone trained and currently authorized to service a particular printer will be able to access its service documentation.

If you have any issues or need assistance, please contact the infocenterhelp@3dsystems.com.

CAUTION: Use of controls or adjustments, or performance of procedures other than those contained in any official manual for this machine, may result in hazardous radiation exposure.

    NOTE: Closed light-projection products are not considered to be hazardous.

 

The Figure 4 Standalone printer incorporates a protective housing and radiation-protective lid, such that there is no exposure or human access to the radiation generated by the light projector during normal operation. The print engine was evaluated to IEC 62471 and classified as Risk Group 2. This means the UV light is only a moderate risk and does not pose a hazard due to aversion response to bright light or thermal discomfort. However, it is still good practice not to stare directly into the projector, particularly when running the machine with an empty resin tray.

All service to the light-projection process machine, the embedded light-projection system, and other components requiring sensor override shall only be performed by 3D Systems Corporation service personnel, their authorized agents, or personnel who have been service trained by 3D Systems Corporation.

Product Labels

The numbers in Item column below correspond to the numbers in the images that follow.

Item Description Qty Label
1 Product Label - Contains system information and certification symbols 1 product-label.jpg
2

Optical-Radiation Warning Sticker

Risk Group 2 - Possible hazardous optical radiation emitted from the product. Do not stare at operating lamp. May be harmful to the eyes.

1 UV-label.jpg

uv-label-placement.jpg