Settings Tab

3D Systems’ Infocenter Moves to Salesforce

The Infocenter has been the 3D Systems portal for customer-facing and service-facing product documentation (for example videos, software downloads, and material SDSs).  

As of Sept 26, 2022, the Infocenter content will be moved to Salesforce and will be accessible through the Salesforce Community https://support.3dsystems.com/s/.

Service Documentation Only

To access service documentation, you will need to sign into Salesforce Community using your Salesforce username and password. Everyone trained and currently authorized to service a particular printer will be able to access its service documentation.

If you have any issues or need assistance, please contact the infocenterhelp@3dsystems.com.

Tap the IP address on the Settings screen to enter the Network Settings screen.

Printing_Settings-network-manual.jpg
A DHCP - a network protocol that enables a server to automatically assign an IP address to a computer from a defined range of numbers (i.e., a scope) configured for a given network. Uncheck this box to enable editing of the IP Address, Subnet Mask, Gateway, and DNS Servers.
edit-subnet.jpg
B IP Address - The numerical address given to your printer on your network. For display only. This number cannot be changed through this interface.
C Subnet Mask - hides, or "masks," the network part of a system's IP address and leaves only the host part as the machine identifier. Contact your network administrator if there is a need to change this number.
D Gateway - a router interface connected to the local network that sends packets out of the local network. For display only. This number cannot be changed through this interface.
E DNS Servers - the internet's system for converting alphabetic names into numeric IP addresses. For display only. This number cannot be changed through this interface.
F Proxy - Opens the Proxy screen for configuring a proxy server