Specifications and Requirements

3D Systems’ Infocenter Moves to Salesforce

The Infocenter has been the 3D Systems portal for customer-facing and service-facing product documentation (for example videos, software downloads, and material SDSs).  

As of Sept 26, 2022, the Infocenter content will be moved to Salesforce and will be accessible through the Salesforce Community https://support.3dsystems.com/s/.

Service Documentation Only

To access service documentation, you will need to sign into Salesforce Community using your Salesforce username and password. Everyone trained and currently authorized to service a particular printer will be able to access its service documentation.

If you have any issues or need assistance, please contact the infocenterhelp@3dsystems.com.

Total Printer Footprint (xyz)

Doors open

Doors closed

 

61.1 x 155.7 x 209.1 cm (26.0 x 61.3 x 82.3 in)

61.1 x 72.9 x 209.1 cm (26.0 x 28.7 x 82.3 in)

Total Controller Footprint (xyz)

Doors open

Doors closed

 

56.5 x 156.3 x 153.8 cm (22.2 x 61.5 x 60.6 in)

56.5 x 65.2 x 153.8 cm (22.2 x 25.7 x 60.6 in)

Net Build Volume on Print Engine (xyz) 124.8 x 70.2 x 346 mm (4.9 x 2.8 x 13.6 in)
Native Resolution (depending on machine installation)

65 micron (390.8 effective PPI)

Projector Wavelength 405 nm nominal
Material Packaging 2.5 kg cartridge
Post-Processing

Please see Post-Processing Guide for recommended equipment.

Computer System Requirements
  • Windows 7 (SP1),8.1,10 (64-bit only)
  • 3D Sprint software (included with Printer)
File Input to 3D Sprint All 3D model file types
File Export to Controller .f4x
Electrical Requirements for Controller 100-240 V~, 50/60 Hz., Single Phase, 5 A
Electrical Requirements for Printer 100-240 V~, 50/60 Hz., Single Phase, 2.5 A
MAINS supply voltage fluctuations + 10%
Overvoltage Category OVII - energy-consuming equipment to be supplied from the fixed - installation https://www.ptr.eu/en/know-how/connection-technology/approvals-regulatio...
Circuit Breaker Specifications 2A, 10A
Network Ready Built-in Ethernet
Shop Air Requirement 70-110 psi of dry air, < 1 cfm consumption
Exhaust Flow Rate Variable, 82-410 cfm