1. User Guide
  2. Operation
  3. Controller User Interface
  4. Status Screen
  5. Printer - Expanded View
  6. Resin Tray Card
  7. Resin Tray Status

Resin Tray Status

resin-tray-status.jpg

As mentioned in the section Resin-Tray Card, the display in that card shows the current status of the resin tray. Below is a further explanation of these statuses:

Not Present - Indicates that there is no resin tray inside the Printer

Tensioned - Indicates that a resin tray is present and that its membrane is under pneumatic tension

Untensioned - Indicates that a resin tray is present and that its membrane is not under tension