Shut Down Figure 4 Modular Components

3D Systems’ Infocenter Moves to Salesforce

The Infocenter has been the 3D Systems portal for customer-facing and service-facing product documentation (for example videos, software downloads, and material SDSs).  

As of Sept 26, 2022, the Infocenter content will be moved to Salesforce and will be accessible through the Salesforce Community https://support.3dsystems.com/s/.

Service Documentation Only

To access service documentation, you will need to sign into Salesforce Community using your Salesforce username and password. Everyone trained and currently authorized to service a particular printer will be able to access its service documentation.

If you have any issues or need assistance, please contact the infocenterhelp@3dsystems.com.

Printer

To shut down the Printer, simply press the power button on the front of the machine. Please see the section Emergency Shutdown for more information. press-power-button.jpg

Controller

To shut down the Controller, simply flip the power switch above the power inlet to the O position. Doing this will stop the print queue from processing, but will NOT stop any current print jobs. Please see the section Emergency Shutdown for more information.

 

3D Systems bug_3-color_light-bkgrd_tm.png  

3D Systems, Inc.
333 Three D Systems Circle | Rock Hill, SC | 29730
www.3dsystems.com

 

 

 

©   by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. 3D Systems, the 3D Systems logo are registered trademarks and Figure 4 Modular and Figure 4 are trademarks of 3D Systems, Inc.

Rev A, P/N 42-D052