Label Installation Diagram

The printer has many warning labels throughout. This section details what those warning labels are, how many of each warning label are on the printer, and the locations of each type of label. It is important to use the machine with extreme caution to avoid situations that may be hazardous. The numbers in the Item column below correspond to the numbers in the images that follow.

Item Description Qty Label
1 Product label - Printer 1 37-0418_Brill-3D-Culinary-Printer_DataPlate-.jpg
2 - IEC 60417-5019 Protective Earth; Protective Ground (label inside panel, not accessible by customer) - To identify any terminal which is intended for connection to an external conductor for protection against electric shock in case of a fault, or the terminal of a protective earth (ground) electrode.

1

1201_OnYourMark_fig2.jpg
3 - IEC 60417-5009 Stand-by - To identify the switch or switch position by means of which part of the equipment is switched on in order to bring it into the stand-by condition, and to identify the control to shift to or to indicate the state of low power consumption. 1 standby-symbol.jpg
panda-back-labels.jpg panda-back-labels-2.jpg
Printer back, cover on Printer back, cover off
panda-front-labels.jpg
Printer front