About This Manual

Once your Brill 3D Culinary Printer parts have finished printing, they are considered "green" regarding appearance and material properties. To complete the creative process, the parts must finish drying in the Build Bin and be post-processed as described in this manual. 

The instructions in this guide are only meant to be applied to those powders/binders that are available for the printer. 

This guide will walk you through basic post processing, which involves removing parts from the Culinary Printer, de-powdering the parts in the Culinary Finishing Station, and storing the finished parts before consumption. Advanced post-processing techniques can be found in the Culinary Printer Best Practices.