Preparation for Receiving

Moving and positioning the crated printer and finishing-station components requires a pallet jack or forklift (customer supplied). Your printer and post-processing equipment will arrive in the following packages:

  • 1 wooden crate for the printer (contains cardboard box with accessories)
  • 1 outer box on a pallet for the finishing station

NOTE: Crates can only be unpacked by, or under the supervision of, a certified Field Engineer (FE). The manufacturer accepts no responsibility for missing items or product damage if crates are opened without an FE present supervising this procedure.

 
Arrange for a location to store your printer components until your appointment with an FE. If you do not have an adequate pallet jack or forklift on-site, contact the shipping company in advance of the shipment to discuss whether one is needed for receiving the shipment. An adequate forklift is one that can handle the widest crate, which is for the printer: 56 x 40 x 57 in (142.2 x 101.6 x 144.8 cm) and 830 lbs. (376.5 kg). The image below shows an example of where to place the forks; however, the crate is designed such that it can be lifted from any side.

move-crate.jpg