Cleaning Process

Allow uncured material to drain off the part while still in the printer before washing in solvent. This will prolong the life of the solvent. Depending on the application requirements, the parts can be removed from the print platform or can remain attached to be cleaned together.

 

Caution.png

Caution:  The Accura® AMX™ Rigid Black material is an acrylate-based resin.  Both epoxy and acrylate parts can be cleaned in the same initial solvent bath. However, it is very important that all subsequent solvent baths, tools and carts/ cleaning areas be kept separate.  Failing to do so could contaminate the entire vat; negatively affecting photosensitivity and the mechanical properties of the finished part.  All print platforms should be thoroughly cleaned, dried, and post cured before using in an epoxy-based printer.