Figure 4 TOUGH 60C WHITE

Figure 4® Tough 60C White - Versatile utilities with a good combination of impact strength, elongation, and tensile strength. Long-term indoor and outdoor mechanical and color stability.

General Tips

  1. General best practices apply, as seen in the Figure 4 Print Material Quick Reference.
  2. For best results use the Resin Mixer to gently stir between prints and after the resin has been sitting overnight.

    CAUTION: Do NOT press down on the film when stirring.

  3. Avoid printing parts flat. Orient parts for better flat surfaces.
  4. When printing  thick parts or very dense platforms, use Premium Plus for best results. Note mode will be ~2x slower but can provide very good part quality.

  5. For best results space parts at a minimum of 10mm apart.


Please see Orientation section for TOUGH-GRY 10.


General Flat Tip

Best for general use for fine small parts up to large and large cover parts

Fine Flat Tip

Best for large, thin parts or small fine feature parts. Check coverage before printing.

General Round Tip - Default

Best for Standard Thick build style, when reliability is a must, such as tensile bars and accuracy blocks