Figure 4 High Temp 150C FR Black

Figure 4® High Temp 150C FR Black - A rigid, fire-retardant resin that can be used for production of parts requiring UL 94 V0 capability as well as FAR Part 23.853 and FAR 25.853 capability

General Tips

  1. General best practices apply, as seen in the Figure 4 Print Material Quick Reference.
  2. For best results use the Resin Mixer to gently stir between prints and after the print material has been sitting overnight.

    CAUTION: Do NOT press down on film when stirring

Orientation

Please see Orientation section for TOUGH-GRY 10.

Supports

General Round Tip - Default

Best for general use for medium sized parts up to large and large cover parts.

Post Processing

  1. General Best Practices apply
  2. Manual clean ONLY, do not use sonication
  3. Parts can scratch easily in the green state; so take care while cleaning not to have multiple parts crowded together and rubbing against each other.
  4. Due to the lack of sonication, a soft bristled brush and/or IPA squirt bottle may be required to clear small crevices of uncured resin.