ProJet® MJP 5600 PRINTER FEATURES

Build Modes

The ProJet® MJP 5600 3D Professional System features four build modes and improved print speed to deliver high fidelity prototypes for a variety of applications.  The build area in all modes is 518 x 381 x 299 mm,  (20.4 x 15 x 11.8 inches), (x,y,z).
UHD, Ultra High Definition Mode – Allows the user to build very high resolution parts with exceptional surface finish and superior accuracy. UHD mode prints at 16 micron layer thickness.
UHDS, Ultra High Definition Mode (Single Material) – Allows user to print very high resolution parts with exceptional surface finish, superior accuracy and higher throughput (print speed). UHDS mode will print the entire build in one of the base materials loaded on the printer. The user can select which material to run in this single material mode. UHDS mode prints at 16 micron layer thickness.
XHD, Extreme High Definition Mode - Allows the user to build at the very highest resolution and surface quality. XHD mode prints at 13 micron layer thickness.
XHDS, Extreme High Definition Mode (Single Material) – Allows the user to build at the very highest resolution and surface quality and higher throughput (print speed). XHDS mode will print the entire build in one of the base materials loaded on the printer. The user can select which material to run in this single material mode. XHDS mode prints at 13 micron layer thickness.

 

Part Stacking and Nesting

Stacking: The user can utilize the entire build area by stacking parts vertically in the z-direction to fill up the entire build envelop with parts. The user can control the space between layers to minimize support material usage and build time. Hours can be saved by stacking parts and submitting single, long builds overnight and weekends.
Nesting capability allows parts to be placed within the boundaries of one another but not overlapping the part structure itself.

Simultaneously use Two Materials for Part Building

The ProJet® MJP 5600 provides the simultaneous use of two build materials along with a support material. The 3D printer system has a total of four material delivery modules, (MDM).  Each MDM holds two bottles of material.  This provides for a total of four bottles of support material and four bottles of build material.
Support material is loaded into both MDMs located on the left side of the machine, for a total of four bottles. 
Build material is loaded into the MDMs located on the right side of the machine.  The upper MDM is designated MDM “A” and the lower MDM is designated MDM “B”.  Two bottles of build material A are placed into MDM “A” and two bottles of part material B are placed into MDM “B”.  

The following build materials are available for the ProJet® MJP 5600:

  • VisiJet® CR-CL, Rigid Clear Build Material
  • VisiJet® CR-BK, Rigid Black Build Material
  • VisiJet® CR-WT, Rigid White ABS-like Build Material
  • VisiJet® CE-NT, Elastomeric Natural Build Material
  • VisiJet® CE-BK, Elastomeric Black Build Material

The following support materials are available for the ProJet® MJP 5600:

  • VisiJet® S500.
Note.png NOTE: For more detailed information regarding ProJet 5600 material characteristics please click here.