© 2016 by 3D Systems, Inc. All rights reserved. This document is subject to change without notice. This document is copyrighted and contains
proprietary information that is the property of 3D Systems, Inc. The licensed user, in the name of whom this document is registered (the
“Licensed User”) does not have the right to copy, reproduce, or translate this document in any way or to any media without the prior written
consent of 3D Systems, Inc. No copies of the document may be sold or given to any person or other entity. ProJet, VisiJet, Geomagic, 3D
Systems and the 3D Systems logo are registered trademarks of 3D Systems, Inc.
This equipment has been tested and found to comply with the limits for a class “A” digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at their expense. Changes or modifications not expressly
approved by 3D Systems could void your authority to operate this equipment.
Radio Frequency Transmission
This product generates 13.56 MHz using an Inductive Loop System as a Radio Frequency Identification device (RFID). This RFID device
complies with the requirements specified in FCC Part 15, Industry Canada RSS-210, European Council Directive 99/5/EC, and all applicable
local laws and regulations.
Operation of this device is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The device referenced in this guide contains transmitter, FCC ID: 2ADGF-SKTKM1 IC: 12666A-SKTKM1. Access to the transmitter for service
technicians is available through common enclosure access methods including use of common tools and removal of covers.
Note: Changes or modifications to this equipment not specifically approved by 3D Systems may void the user’s authority to operate this
LIMITATIONS OF WARRANTY AND LIABILITY
This information is provided by 3D Systems for the convenience of its customers. It is believed to be reliable, but NO REPRESENTATIONS,
GUARANTEES, OR WARRANTIES OF ANY KIND ARE MADE AS TO ITS ACCURACY, FITNESS FOR A PARTICULAR USE, OR THE RESULTS
TO BE OBTAINED THEREFROM. The information is based in whole or in large part on laboratory work and does not necessarily indicate
performance in all conditions. Notwithstanding any information provided by 3D Systems or its affiliates, the customer remains fully responsible for
determining which federal, state, or local laws or regulations, or industry practices are relevant to activities in which it engages, as well as assuring
that those laws, regulations, or standards are complied with under actual operating conditions, and 3D Systems undertakes no responsibility in
IN NO EVENT WILL 3D SYSTEMS BE RESPONSIBLE FOR DAMAGES OF ANY NATURE, INCLUDING SPECIAL OR CONSEQUENTIAL
DAMAGES, RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. THE CUSTOMER ASSUMES ALL RISK
RESULTING FROM THE USE OF THIS INFORMATION. Customer use of the materials that follow is an acknowledgment of its agreement to
the foregoing. Any customer not wishing to be bound should return this material to 3D Systems. Nothing contained herein is to be considered as
permission, recommendation, or inducement to practice any patented invention without permission of the patent owner.