Published on ProJet MJP 5600 (http://infocenter.3dsystems.com/projetmjp5600)

Home > User Guide > TOUCHPAD OPERATION > Copy A Job

Copy A Job

Copy a Print job

  1. Select Prints icon, then select the next arrow.pngkey for the job you want to copy.
  2. The Print Queue screen is displayed.

Copy_1.png

  1. Print job you selected is displayed.

Copy_2.png

  1. Press the copy icon. copy.png
  2. Press Yes to the displayed message,  Copy selected job?

Copy_3.png

  1. The print job is placed at the end of the print queue.

Copy_4.png

If you need to position the copied print job to a different position in the print queue:

  1. Press next arrow.pngkey for the job you would like to reposition in the print queue.
  2. Use the arrow keys to move the print job to a different position in the print queue.

Delete_3.png

 

Copyright © 3D Systems, Inc. All rights reserved.
Copyright © 3D Systems, Inc. All rights reserved. | Source URL: http://infocenter.3dsystems.com/projetmjp5600/user-guide/touchpad-operation/copy-job