TOUCHPAD OPERATION

Pause a Print job

  1. To pause an active print job, press the Pause key. 

 

  1. The message bar will display PAUSE ACKNOWLEDGED. The 3D printer system state indicator will change to yellow.

  2. The message bar will continue to display PAUSE ACKNOWLEDGED until the 3D printer system has completed printing the current layer.

 

  1. After the current layer is complete, the message bar will display PRINT PAUSED.

  2. The message bar will also display AUTO RESUME: 05:00, indicating that the 3D printer system will automatically resume printing in five minutes. 

  3. The user may also manually restart the print job by pressing the Start key.

 

 

Abort a Print job

  1. To abort an active print job, press the Abort key.  
  2. Press Yes to the message, ABORT JOB? Y/N.

  1. The Start key and the Abort key will “gray-out” and the message bar will display ABORT ACKNOWLEDGE

  1. The Start key will return to green and the Abort key will return to red.  The message bar will display FINISHING PRINT

  1. The 3D printer system will continue multiple curing cycles so the user will not be exposed to uncured material when removing the print.  The 3D printer system will continue to display FINISHING PRINT during the curing cycles.
  2. After the 3D printer system has completed the curing cycles, the message, REMOVE PRINT is displayed. 

  1. Press OK to the REMOVE PRINT message.  Open the build chamber and remove the print job from the build chamber.

Copy a Print job

  1. From the Status screen tool bar, press Prints.

  1. The Print Queue screen is displayed.
  2. On the Print Queue screen, press Edit. 

  1. Select the print job you want to copy.  A check mark will appear beside the print job.

  1. Press the copy icon. 
  2. Press Yes to the displayed message,  Copy selected job?

  1. The print job is placed at the end of the print queue with  -Copy as a designator.

If you need to position the copied print job to a different position in the print queue:

  1. Press Edit.
  2. Select the print job.
  3. Use the arrow keys to move the print job to a different position in the print queue.

Delete Build Job 4.jpg

 

Delete a Print Job

  1. From the Status screen tool bar, press Prints.

  1. The Print Queue screen is displayed.
  2. On the Print Queue screen press Edit

  1. On the Print Queue screen press Edit

  1. Press the delete icon. Delete Key.png
  2. Press Yes to the displayed message,  Delete selected job?

  1. The print job is deleted from the print queue.