Print Platform Installation

 

  1. Clean print platform using Isopropyl Alcohol before installing into printer. 
  2. Open the chamber door.
  3.  Align platform’s rear notch (B) into x-carriage’s locating tab at the back of carriage.
  4. Pull the release latch retaining screw (A) (located at the front of the x-carriage) out.
  5. Press latch (C) (located at the front of x-carriage) down and place printpad's front notch into the locating tab.
  6.  Release latch to secure print platform.

  1. Close the front door and press “Play” on touchscreen to bring the printer ONLINE (D).

 

 

  1. To remove the platform, pull retaining screw out and press latch down, lift print platform from x-carriage.