1. User Guide
  2. Printer Set-up

Printer Set-up

 

CAUTION: Verify printer’s rear panel power switch is OFF.  Connecting power with switch on can damage printer and cause bodily injury or death due to sudden, unexpected mechanical motion..

WARNING: READ AND FOLLOW SAFETY GUIDELINES IN ELECTRICAL SAFETY. IGNORING THESE GUIDELINES COULD RESULT IN DEATH, BODILY INJURY, OR PRINTER DAMAGE DUE TO ELECTRICAL SHOCK OR FIRE

 

Power-on Printer

  1. Plug printer power cord into printer’s rear panel socket (A) and into the facility’s grounded power outlet. 

NOTE: If 200-240 VAC required, connect power cord to external transformer and then plug transformer power cord into a grounded power outlet.
  1. Place switch located at the rear of printer to the ON position (B).
  2.  Wait 4 hours for printer to warm up before bringing printer online.

NOTE:  A shielded Ethernet cable is required when connecting from the printer to the your computer.