Computer Requirements (Minimum Recommendation)
Computer Requirements (Maximum Recommendation)
OS- Windows 7 (32-bit or 64-bit), Windows 8 (32-bit or 64-bit)
|Multiple core processor|
|CPU – Intel® or AMD® processor with a minimum of 2.0 GHz||Multiple core processor;
Hyper-threading and clock speeds above 3 GHz can be beneficial but should be paired with a good balance of cores
|RAM – 4 GB||
RAM - 8 GB or more,
Virtual memory: in Win 7 & 8 it is recommended to use the default option, “Automatically manage paging file size for all drives”
|Hard Disk -800MB of available disk space for installation; additional free space is required during installation.
Temporary file cache requires about 3 GB free space for every 100 million points
|SSD or 10,000 RPM HHD|
|GPU – OpenGL 2.1 and GLSL 1.20 enabled graphics card.||NVidia or AMD GPU with 1GB of RAM or more|
- The AC voltage and current requirements for the ProJet® Production Printing System are:
- 100 VAC, 50/60Hz, 14.9A
- 115 VAC, 50/60Hz, 13A
- 220 VAC, 50/60Hz, 6.5A
- 230 VAC, 50/60 Hz, 6.3A - requires 3D Systems’ external transformer kit, p/n 23418-90X-XX, provided separately in the printer country kit.
NOTE:The installation of The ProJet® Production Printing System shall comply with the National Standards and/or Electrical Codes of the country in which it is placed.
- 955 lbs. (433 kg) - Crated
- 659 lbs. (298 kg) - Uncrated
The ProJet® Professional Printing System requires an Ethernet network connection to transfer print jobs from workstation(s) to the printer.
Network Specifications, Physical: The machine’s internal controller provides an integrated, 10/100-megabit-per-second (Mbps) Ethernet network connection. This connection supports both the 10base-T and 100base-TX Ethernet standards. The controller’s connector (an RJ45 socket located on the back panel) is designed for attaching an shielded twisted pair (UTP) Ethernet cable.
When a facility’s internal network is not 10base-T or 100base-TX, a media converter, such as a Coax to 10base-T will be required. Consult with your organization’s network engineering or MIS staff to provide assistance with these requirements.
The printer works on networks running TCP/IP ONLY each printer MUST have a STATIC IP address on the network. Additionally, each printer’s subnet mask and default gateway must be known and available to 3D Systems’ 3D Systems Field Service Engineer or authorized reseller at the time of its installation, and should also be known by personnel installing the client software. They will need access either to the appropriate subnet mask or the individual IP address of each printer to complete the workstation software installation, and to enable access to any printer on the network.