Material Storage

VisiJet® part and support materials should be stored in a conveniently located storage cabinet in proximity to the printer itself. A cabinet is recommended to protect against long term exposure to external UV light sources, including sunlight, overhead lighting, or other UV light sources. Storage tempeMaterrature of the material should not exceed the specified maximum of 35°C (95°F). VisiJet® part material should be stored away from strong oxidizing agents, such as hydrogen peroxide, bromine, or chromic acid.
More detailed information on the VisiJet® part material and VisiJet® support material, relevant applicable safety precautions and remediation, and specific storage and disposal requirements, can be found in the Material Safety Data Sheet (MSDS) included in each case of VisiJet® material shipped by 3D Systems. Your organizations’ Facilities Manager (or equivalent) should maintain a copy of the two MSDS documents, and provide ready, convenient access to these documents. To obtain the VisiJet material MSDS from 3D Systems, click here for additional copies. If further information is needed, please contact 3D Systems’ Customer Hotline within the U.S. at (800) 793-3669 (or from outside the U.S.A. at +49 (0) 6151 357-357, or by visiting 3D Systems website.

Material Bottle Disposal

Used material bottles must be disposed of in a manner consistent with local and other applicable laws and regulations governing such materials. Refer to the MSDS sheets for this material prior to shipment of the ProJet Professional Printing System, and discuss your organization’s methods for disposing or recycling of such material with your facilities manager, or contact 3D Systems’ Customer Support Hotline for more information.