Published on ProJet MJP 2500W/IC (http://infocenter.3dsystems.com/projetmjp2500w)

Home > User Guide > Printer Setup > Power On Printer

Power On Printer

Switch power on located in the back of the printer to power on the device. Once the printer is switched on it should remain on unless it will not be used for a significant amount of time (>60 days). 

UI will begin to power up. This may take a minute or two for the screen to come on. When the UI is booted up the 3D Systems logo will appear and then the Status screen will appear.

IMG_5610.JPG


Copyright © 3D Systems, Inc. All rights reserved. | Source URL: http://infocenter.3dsystems.com/projetmjp2500w/user-guide/printer-setup/power-printer