Published on ProJet MJP 2500W/IC (http://infocenter.3dsystems.com/projetmjp2500w)

Home > User Guide > Introduction

Introduction

ProJet MJP 2500W

The ProJet® MJP 2500W 3D printer system is a Multi-Jet Printer (MJP) printer. The solid imaging 3D printer produces wax casting patterns from 3D solid Computer-Aided Design (CAD) models and through the 3D printer system client software. The parts are generated in a rapid prototype (RP) environment. The primary features of the printer are the user interface, build chamber including the print engine, and the material delivery module (MDM), which contains the materials and waste bag.

VisiJet® Materials for ProJet® MJP 2500W
VisiJet M2 SUW (SW - Support Wax) VisiJet® M2 Cast (PW - Part Wax)
Note.png

NOTE:  The ProJet® MJP 2500W is a wax printer and thus has no UV lamps installed.

Projet_MJP_2500W_Angle01.jpg

 

ProJet MJP 2500 IC

The ProJet® MJP 2500 IC 3D printer system is a Multi-Jet Printer (MJP) printer. The solid imaging 3D printer produces wax casting patterns from 3D solid Computer-Aided Design (CAD) models and through the 3D printer system client software. The parts are generated in a rapid prototype (RP) environment. The primary features of the printer are the user interface, build chamber including the print engine, and the material delivery module (MDM), which contains the materials and waste bag.

VisiJet® Materials for ProJet® MJP 2500 IC

VisiJet® M2 IC SUW

(SW - Support Wax)

VisiJet® M2 ICast 

(PW - Part Wax)

 

NOTE:  The ProJet® MJP 2500 IC is a wax printer and thus has no UV lamps installed.

Projet_MJP_2500 IC_.png

 


Copyright © 3D Systems, Inc. All rights reserved. | Source URL: http://infocenter.3dsystems.com/projetmjp2500w/user-guide/introduction