Cleaning Filter Screen (ProJet® MJP 2500W)
There is a screen that is placed above the particulate filter to add extra filtering protection for the filter. This screen will need to be checked or cleaned weekly.
- Open the compartment holding the filter screen by loosening the two thumb screws above the particulate filter compartment (1).

- Wearing Nitrile gloves, lift panel up and pull out screen.

- If more than 50% of the screen is blocked, clean the screen by holding over an approved waste disposal receptacle and brushing off loose particles from screen. Screen may then be wiped clean using a paper towel with water.

- Close panel and tighten thumb screw.