Display Parts

If you do not like the white surface appearance on your part, you can return it to all purple to make it aesthetically pleasing.

Items Needed:

  • Spray gun _ A spray gun with IPA may be used to make displays part more vibrant in color and lessen the appearance of any white surfaces
  • 99% > Isopropyl Alcohol (IPA)
  • Baby Oil

NOTE: Keep in mind that this oiling step is only for display parts. Oiled parts will not cast well.

  1. Make a small mixture of IPA and Baby Oil in the bottom of the paint can. Mix by volume, 70% IPA, 30% baby oil. The two liquids have very different densities and will separate over time, make sure to mix it thoroughly before use.

  2. Hold the part approximately 10 inches away from the spray nozzle before applying the coating. For best results it is recommended to apply 3-4 light coatings with a light mist each time. Do not oversaturate the parts.

  3. Allow the part to thoroughly dry for the best color vibrancy.

  4. If the color results are not satisfactory apply an additional coating.