MDM Maintainance

The following general maintenance procedures provided must be accomplished to help maintain high part yield and to reduce the printer down time.

When changing material cartridges, material may be present in the MDM receptacle after the cartridge is removed. If a large pool of material is present (bottom is submerged and walls of the cartridge receptacle are reached), do not place a clean material cartridge into the receptacle, call your reseller/partner.

 CAUTION: The MDM cartridge receptacle and material will be warm; avoid touching the sides of the holder during the cleaning process. Wear heat resistant gloves and goggles.

Cleaning the MDM Drawer

Using Isopropyl Alcohol and a lint free cloth, dampen cloth with the alcohol and clean around the cartridge receptacle.