Inspect Planarizer Blade
The planarizer blade will need to be inspected periodically and wiped off. Excess material can build up over time.
- In the UI click on Tools > Diagnostics > Inspect Planarizer Wiper Blade
-
Carriage will move out of the way and planarizer assembly will tilt, allowing access to the blade.
-
Lift top door.
-
Open planarizer cover to access wiper blade assembly.
-
Wearing nitrile gloves, take a paper towel with isopropyl alcohol and wipe off excess buildup off of blade.
![]() |
CAUTION: Blade is sharp, wipe blade with care. |
- Close Planarizer access cover.
- Close top cover, carriage will return to home position.
- On the user interface, select Tools > Operator Maintenance > Planarizer Wiper Blade > Yes, that it has been cleaned.