Cleaning the User Interface

Remove any printed parts before cleaning the user interface. This will prevent the printer from initiating any actions if controls are accidently pressed.

Spray a water-based solvent such as Simple Green onto a lint-free soft cloth; do not wipe with a dry cloth or spray cleaner directly onto touch screen.

Gently wipe dirt and part material residue from touch screen using an ammonia-based glass cleaner on a clean, lint-free cloth.

Do Not Use:

  • A dry cloth on the touch screen
  • Any cleaning products that contain acetone, MEK or alcohol
  • Any abrasive cleaning products
  • Using these cleaning products can damage the touch screen.