Cleaning Filter Screen

Cleaning Filter Screen

There is a screen that is placed above the particulate filter to add extra filtering protection for the filter. This screen will need to be cleaned periodically.

  1. Open the compartment holding the filter screen by loosening the two thumb screws above the particulate filter compartment (1).

  1. Wearing Nitrile gloves, lift panel up and pull out screen.

  1. If more than 50% of the screen is blocked, clean the screen by holding over an approved waste disposal receptacle and brushing off loose particles from screen. Screen may then be wiped clean using a paper towel with water. 

  1. Close panel and tighten thumb screw.