1. Facility Requirements Guide
  2. 3D Connect

3D Connect

3D Connect Service:

 

This printer is 3D Connect capable. For more information, please visit the link below:

https://www.3dsystems.com/software/3d-connect

Requirements:

  • Equipment supplied by 3D Systems:  3D Connect™ adapter with international power converters
  • The adapter must be network reachable by the printer that is to be installed
  • Equipment to connect a machine (not included in box) : Cat5 Network Cable
  • The adapter will need external internet access to reach analytic servers
  • Dedicated port with a static IP address to be allocated and configured by customer's IT department
  • The adapter will require an electrical power outlet

Configuration

The 3D Connect™ adapter will need to be configured by a 3D Systems or Service Certified partner using specific information from your network environment.

Please be prepared to provide the following information on the dedicated port to configure the adapter:

  • Dedicated Static IP Address
  • Subnet Mask
  • DNS Server Name
  • Default Gateway Addresses

For more information on availability, please contact your salesperson or service provider at 3D Systems.