Post-Processing

After your 3D model is fully dry and fine cleaned, it can be infiltrated. For monochrome parts where strength is not critical, Salt Water Cure is a quick, easy post processing method. Wax cure is an easy and safe method of infiltration resulting in brighter colors and medium strength. ColorBond™ is a high strength solution for concept models which is fast drying and results in very vibrant colors. StrengthMax™ will confer superior strength for functional models. Parts should be completely depowdered and allowed to dry at room temperature overnight before post processing for optimal results.

Post processing kits for the use of Salt Water Cure, Wax, ColorBond, and StrengthMax curing are available at your local 3DSystems authorized reseller.