1. User Guide
  2. Printer Maintenance
  3. Replace the Waste Tray

Replace the Waste Tray

If the Waste Tray is Full, 3DPrint displays EMPTY WASTE TRAY in the Printer Status dialog.

To replace the Waste Tray, follow the steps below.

Note.png

NOTE: Wear protective gloves for the below procedure.
  1. Remove rear cover.
  2. Pull the full Waste Tray out of its compartment on the printer.
  3. Insert a new Waste Tray into its compartment. Ensure the Tray is pushed all the way in.

IMG_3665.JPG

  1. Replace the rear panel.