Empty The Debris Seperator

After vacuuming, clean the Debris Separator. The Debris Separator catches any large particles and keeps those pieces from being recycled into the feeder. To clean the Debris Separator follow the steps below.

Important: The Debris Separator must be cleaned after every build, in order to maintain the efficiency of the vacuum system.

1. Pull the Debris Separator out of its holder on the printer.
2. Empty the contents into a trash receptacle.
3. Use the soft brush found in the Accessory Kit to brush any caked-on Core from the screen.
4. Reach into the receptacle area with a stiff brush and remove any Core clinging to the screen.