Published on ProJet CJP x60 (260, 360, 460) (http://infocenter.3dsystems.com/projetcjpx60)

Home > 3DPrint Software User Guide > Setup The Build > Part Orientation > Parts Containing Overhangs

Parts Containing Overhangs

For delicate parts and parts with overhangs, create a Fixture, or create a Fixture for the area of the part that needs support. Unsupported overhangs are placed on the rear-most side of the Build Bed, as close to the bottom of the Build Bed as possible.

sigpartwith2fixturesresize.jpg

                                       An example of a part with two Fixtures to support the overhangs