- Place a clean sheet of non-stick material (Teflon, freezer paper or wax paper) on your work area for easy clean up and to put your parts on as they dry.
- Add a layer of paper towels where your model(s) will be placed to wick excess salt water away from your model
Tip: Have a sheet of the non-stick material on a tray so parts can be safely moved while they dry.
- For spraying, you will need a spray bottle (supplied with your starter kit or your upgrade kit).
- For dipping, you will need a sturdy, clean, watertight container (example: plastic, glass) and a graduated container or some other means of measuring volume of water and salt.