Create A Witness Part

  1. Select your part in 3DPrint.

nowitnesspart.png

  1. Select Tools > Create Witness Part.
  2. The Witness Part dialog appears.

witnesspartdialog.jpg

  1. Enter the values for Clearance and Thickness.
Note.png

NOTE: It is recommended that you use the default settings as they are configured for your printer powder type.

 

  • Clearance is the spacing between the part and the witness part.
  • Thickness is the thickness of the witness part
  1. Click OK. The witness part is generated.

witnesspart.png