Cleaning Printed Parts

The following equipment is needed to clean parts produced on the NextDent 5100 Printer:

1. Stainless steel or glass containers that are big enough to contain the printed parts you wish to make
2. >90% alcohol solvent
3. Ultrasonic cleaner, which agitates solvents like >90% alcohol solvent using ultrasonic sound waves. Sonication is the required cleaning method for your printed parts to achieve medical certification. Your ultrasonic cleaner should have:
   
   1. Digital Timer
   2. Volume great enough to hold your steel or glass containers
   3. Explosion-proof features

WARNING: >90% alcohol solvent is FLAMMABLE AS BOTH LIQUID AND VAPOR. KEEP AWAY FROM HEAT, SPARK AND OPEN FLAMES. USE WITH ADEQUATE VENTILATION. STORE AT 20-30ºC (68-86°F).

always wear gloves when cleaning build parts.