Skip to main content
Toggle navigation
3D Systems.com
Customer Support Center
Infocenter
Shop
Infocenter
Service Sign In
Language
Search form
3D Printers
Software
Materials
Finishing
Support Services
Legacy Printers
Search form
English
中文
Français
Deutsch
Italiano
日本語
한국어
Português
Español
Українська
User Guide
Overview
Back of Printer
Back of Printer
A
Carbon Filter Bracket
- Holds the carbon filter that minimizes fumes coming out of the printer
B
Air Filter Bracket
- Filters the air being pulled in by the cooling fan
C
Power Inlet
- Plug the female end of the printer's power cable into this inlet
D
Ethernet Port
- Plug the supplied Ethernet cable into this port
E
Product Label
- Provides system information for the printer
Printer-friendly version
‹
Print Platform
up
Pedestal
›
Printer-friendly version
Resin Tray Care
3D Sprint Best Practices
Best Practices
Video Tutorials
Service Documentation
Guides Inside the Box
Software Downloads
Accessories
User Guide
Introduction
Safety
Environmental Safety
Safety Switches
Material Handling and Safety
Electrical Safety
Emergency Shutdown
First Aid and Protective Equipment
Safety Notice
Overview
Upper Build Chamber
Lower Build Chamber
Touch Screen and QR Code Scanner
Catch Tray
Resin Tray
Tension System
Resin Tray Garage
Print Platform
Back of Printer
Pedestal
Part Cleaning
Part Drying
LC-3DPrint Box
LC-3DMixer
Specifications and Requirements
Printer Materials and Properties
NextDent Material Documentation
Material Expiration Date
Facility Requirements
3D Sprint Software
Site Selection - NextDent 5100 Printer
Part 1
Part 2
Part 3
Site Selection - Post Processing Equipment
Third Party Supplies and Equipment
System Delivery
System Installation
Considerations for Material
NextDent 5100 Advance Preparation Checklist
Setting Up Your Printer
Necessary Accessories
Optional Accessories
Unpacking the Printer
Unpacking the Pedestal
Place Printer on Pedestal
Level the Printer on Pedestal
Nesting Printers
Install Carbon Filter
Turn Printer On
Printer Activation
Connect Printer to WiFi with Router
System Requirements and Setup
Install 3D Sprint Software
Set Up Printer On Network
3D Sprint Part Orientation Guide
Print-Material Styles Chart
Accuracy Wizard
3D Sprint Additional Documentation
Operation
Touch Screen Overview
Status Tab
Queue Tab
Material Tab
Settings Tab
Network Settings
Network Diagnostics
Firmware Updates
Update Printer Firmware via Update Installer
Update Printer Firmware via 3D Sprint
Prepare and Install the Resin Tray
Install Resin Tray
Add/Change Material and Scan Bottle
Resin Tray Material Cross-Usage
Mixing, Stirring, and Curing Chart
Fill Resin Tray With Material
Mixing Material in the Resin Tray
Prepare and Install the Print Platform
Install Print Platform
Start Printing
Submit Build File via USB
Submit Build File via Network
Change Material Before Printing
QR Code Override
Abort a Print Job
Change Air Filter
Change Carbon Filter
When Printer is Idle / Sleep Mode
Running a Resin Tray Cleaning
Post Processing
Remove Printed Parts From Platform
Cleaning Printed Parts
Cleaning Parts Using an Ultrasonic Cleaner
Cleaning Crowntec Parts
Dry the Build Parts
UV Cure the Parts
Clean Print Platform
Clean Resin Tray
Clean Finishing Tools
Printer Error Message Reference
Service and Support
Preventative Maintenance
Cleaning the Printer
Clean/Replace the Catch Tray
Clean Resin Tray
Clean Tension System
Clean Membrane Interface Lip
Clean Touch Screen and QR-Code Scanner
Inspect and Clean Printer Lid
Inspect Projector Lens and All Cables
Check Printer Level
Check Print Platform Level
Preventative Maintenance Checklist
Troubleshooting
Printed Part Quality
Hardware Issues
Part Cleaning Issues
Network Issues
Repackaging the NextDent 5100
NextDent 5100 Best Practices
EC Declaration of Conformity
Customer Information Bulletins
Warranty