After placing your order, a 3D Systems™ representative will contact you to confirm your shipment delivery date. Ensure that the area where you intend to place your NextDent 5100 Printer is ready to move the system into, and that you have the assistance of another person or lifting device, such as a hand truck, before scheduling the shipment of your printer. The following information will guide you through this preparation phase.
Preparation for Receiving
Inform your receiving personnel that the items you ordered will be arriving and arrange for a location to store them until you are ready to install the printer and any accessories.
Transporting the NextDent 5100 Printer
When the 3D Systems Field Engineer arrives, and the crate is opened, use the help of another person or a hand truck to help move the system. If you do not have a hand truck or another person on-site to help you, arrange to have one or both of these aids beforehand.
The NextDent 5100 Printer will arrive in a variety of crates and/or pallets - the largest crate being for the NextDent 5100 Printer. Your shipment will consist of the following items:
- NextDent 5100 Printer
- Start-up Kit
- Resin Tray
- Print Platform (x2)
- Power Cord/Power Brick
- LC-3DPrint Box - the required post-curing oven used with the printer's resins
- Material Bottles - speak with your 3D Systems representative to determine the number of, and types of, material bottles you should purchase for your first shipment.
Optional items you could have in your shipment:
- LC-3DMixer - to agitate bottles of resin to keep their contents mixed properly. Please see the SDS/Instructions for Use of a specific resin for mixing instructions.
- Ultrasonic Part Cleaner (ordered separately from third party)
Once your shipment arrives, first inspect the crates for any physical damage. Then, after inspection, receive the crates.
The following charts list both crated and uncrated dimensions and weights for different products that you may have ordered. Verify your order and compare to the listed items below. Crate or pallet dimensions and weights may vary.
|NextDent 5100 Printer||73.7 cm (29 in)||68.6 cm (27 in)||129.5 cm (51 in)||59 kg (130 lbs)|
|NextDent 5100 Pedestal||82.6 cm (32.5 in)||79.4 cm (31.3 in)||55.2 cm (21.8 in)||26.3 kg (58 lbs)|
|LC-3DPrint Box||54.5 cm (21.5 in)||57.5 cm (22.6 in)||59.5 cm (23.4 in)||28.9 kg (63.8 lbs)|
|NextDent 5100 Printer||42.6 cm (16.8 in)||48.9 cm (19.3 in)||97.2 cm (38.3 in)||34.5 kg (76 lbs)|
|NextDent 5100, with pedestal||64.4 cm (25.4 in)||66.8 cm (26.3 in)||136.3 cm (53.6 in)||56.3 kg (124.1 lbs)|
|LC-3DPrint Box||41 cm (16.1 in)||44 cm (17.3 in)||38 cm (15 in)||22 kg (48.5 lbs)|
Inspect Exterior of Printer
Visually inspect the exterior of the printer for any damage incurred during shipping. Notify your reseller immediately if any damage is evident at this point. DO NOT proceed with the installation until you have discussed the damage with your reseller.