Connect with us:
Privacy Policy
Sales Terms
Terms and Conditions
Copyright ¨Ï 3D Systems, Inc. All rights reserved.
You may clean the resin tray with >90% alcohol solvent between builds, enabling you to use different resins in the same resin tray (not at the same time). However, if a clear resin is poured into a tray that previously had a pigmented resin, it could result in undesirable coloring of the printed part. Because of this, if you intend to use the whole family of Figure 4 print materials, you will need a minimum of two resin trays for your Figure 4 Standalone Printer. The chart below shows which resins can share the same resin tray (provided that you have cleaned them with >90% alcohol solvent in between uses), with the minimum two trays indicated as trays 1 and 2. You may desire to use more than two trays for your purposes. Mark your resin trays with letters or numbers to help you remember which tray is which.
|
Tray 1 Figure 4 TOUGH GRY 10 Figure 4 TOUGH GRY 15 Figure 4 JCAST-GRN 10 Figure 4 ELAST-BLK 10 Figure 4 FLEX-BLK 10 Figure 4 TOUGH-BLK 20 Figure 4 PRO-BLK 10 Figure 4 HI TEMP 300-AMB Figure 4 FLEX-BLK 20 Figure 4 EGGSHELL-AMB 10 Figure 4 JewelMaster-GRY Figure 4 Rigid White Figure 4 High Temp 150C FR Black Figure 4 TOUGH 65C BLACK Figure 4 TOUGH 60C WHITE Figure 4 RIGID GRAY Figure 4 Rigid 140C Black |
Tray 2 Figure 4 MED-AMB 10 Figure 4 MED-WHT 10 |
Tray 3 Figure 4 RUBBER-BLK 10 Figure 4 RUBBER-65A BLK |