Resin Cartridge

Overview

bottle-overview.jpg
A Cartridge Key - Interfaces with the Cartridge Guide in the MDM to help ensure that that cartridge is installed in the correct orientation
B Valve Cap - Protects the cartridge valve from external elements while in storage.

Top of cartridge 

resin-bottle-top.jpg
A Carry Handle - Always carry the resin cartridge by this handle.
B Ventilation Cap - Vents the resin cartridge to prevent negative pressure inside

Bottom of Cartridge 

bottle-bottom.jpg
A Cartridge Valve - Engages the Resin-Cartridge Coupler in the MDM and opens/closes to facilitate resin flow from the cartridge to the machine.
B Cartridge Chip - This contains memory of all resin cartridge information to be passed onto the machine.

 

Cartridge Stand

As seen in the images above, the Modular resin cartridges have features on the bottom that prevent them from standing up straight on their own in storage. The cartridge stand has a groove cut out to accommodate these features to allow the cartridge to stand up.

bottle-stand.jpgbottle-in-stand.jpg