Post Processing Instructions

Once your printed parts are removed from a Modular Printer, they are still considered green. This means that they are not fully cured and must be handled with 100% nitrile gloves. The print platform that the part is attached to also has uncured resin on it, meaning that it must also be handled with nitrile gloves. This section of the guide will demonstrate how to properly remove the print platform from the machine, remove the printed parts from the platforms, clean the printed parts, and post-cure the printed parts. Once the printed parts have been through all these steps, they will be safe to touch with human hands.

CAUTION: Failure to properly post-process a part not only makes it unsafe to touch, but also can result in part defects.