Emergency Shutdown

ALERT: In the event of an emergency, immediately unplug the power cord from the back of the Figure 4 UV Curing Unit 350.

CAUTION: Do not position the UV Curing Unit 350 such that it is difficult to access the power inlet on the machine in an emergency situation.

 

There are three different ways to shut down the UV Curing Unit 350:

  1. Pull the power cord out the back of the unit. This disconnects all electric current going to the unit. As such, it is the preferred method of shutting down the unit in an emergency.
pull-power-cord.jpg
  1. Press the lit power button in the upper-left-hand corner of the UV Curing Unit 350. This cuts power from the power supply to the rest of the machine. This does not cut the current going from the wall to the power supply. This is easier access than the I/O switch on the back of the machine, and has almost identical function.
press-power-btn.jpg
  1. Flip the I/O switch to the O position. This cuts power from the power supply to the rest of the machine. This does not cut the current going from the wall to the power supply. This also prevents the power button on the front of the machine from functioning.
power-cord-main-power.jpg