Moving and positioning the crated Figure 4 Modular components requires a pallet jack or forklift (customer supplied). Your printer system will arrive in the following packages:
- 1 wooden crate for the Controller
- 1 wooden crate for the Printer and each Auxiliary Print Unit you ordered
- 1 cardboard box on a pallet for the Figure 4 UV Curing Unit 350, and/or
- 1 cardboard box for the NextDent LC-3DPrint Box
NOTE: Crates can only be unpacked by, or under the supervision of, a 3D Systems Customer Support Engineer. 3D Systems accepts no responsibility for missing items or product damage if crates are opened without an authorized 3D Systems employee present supervising this procedure.
Inform your receiving personnel that these crates will be arriving and arrange for a location to store them until your appointment with a 3D Systems Customer Support Engineer. If you do not have an adequate pallet jack or forklift on-site, contact the shipping company in advance of the shipment to discuss whether one is needed for receiving the shipment. An adequate forklift is one that can handle the biggest crate, which is for the Printer: 99.7 x 93.0 x 191.3 cm (39.3 x 36.6 x 75.3 in.) and 281.2 kg (620 lbs).
|Forklift points on Printer crate|