LC-3DPrint Box
Sold separately from the printer, this is the post-curing oven that is recommended for use with the Figure 4 Jewelry printer. Please see the complete User Guide that comes packaged with the LC-3DPrint Box for full usage instructions. For information on print material stirring times, please refer to the Material Stirring and Curing Chart.
| A | Power Button - Switches machine on/off |
| B | Front Panel - Graphical User Interface for oven. This shows information about the lamps, the time left for curing, and error messages. |
| C | Oven Lid - Insert a printed part through this top opening. The lid has a safety interlock that stops the oven when the lid is open. |
| D | Lamp Status Indicators - These indicators will turn red when the UV lamp pair needs to be changed. See the oven's Instructions for Use for more information. |
| E | Timer - Shows time remaining in curing cycle |
| F | Increasing Button - Increases operation time |
| G | Decreasing Button - Decreases operation time |
| H | Program Button - Toggles between preset operation times of 10, 20, and 30 minutes |
| I | Start/Stop Button - Starts and stops oven operation |
| J | UV Lamp - The oven comes with six 18W, 71-color lamps and six 18W, 78-color lamps. See the oven's Instructions for Use for information on correct orientation of lamps. |
| K | Glass Plate - Holds the printed part during curing |
