FabPro Print Materials

fabpro-material-bottles.jpg fabpro-nextdent-bottles.jpg
FabPro Print-Material Bottles NextDent Print Material Bottles

 

The table below lists the FabPro print materials that are currently supported on the FabPro 1000 printer, as well as the properties of cured parts printed with these materials. Please note that not all properties in the table below apply to every material. As such, different materials will have blank spaces for some of the property fields below.

NOTE: All materials come in 1kg bottles.

 

Material Property FabPro™ Proto GRY FabPro™ JewelCast GRN FabPro™ Tough BLK FabPro™ Elastic BLK FabPro™ Flexible BLK

Please see Special Considerations for Flexible BLK

Description Fast, general purpose Master patterns for gypsum investment casting Tough production plastic Design elastomer Polypropylene-like,
flexible
Color Gray Green Black Black Black
Layer Thickness 50 microns 30 microns 50 microns 100 microns 125 microns
Vertical Build Speed 21 mm/hr 5.3 mm/hr 14 mm/hr 14 mm/hr 10 mm/hr
Flexural Strength 100 MPa (14,500 psi) 14 MPa (2030 psi) 64 MPa (9,700 psi)   41 MPa (5950 psi)
Flexural Modulus 2,840 MPa (410 ksi) 577 MPa (84 ksi) 2,020 MPa (290 ksi)   1120 MPa (162 ksi)
Tensile Modulus 2,800 MPa (410 ksi) 355 MPa (51.5 ksi) 1,860 MPa (270 ksi) 3.7 MPa (540 psi) 1330 MPa (193 ksi)
Tensile Strength 67 MPa (9,700 psi) 14 MPa (2,000 psi) 44 MPa (6382 psi) 3.9 MPa (570 psi) 41 MPa (5950 psi)
Shore Hardness 83 D 68 D 79 D 65 A 76 D
Elongation at Break 7% 10% 44% 81% 93%
Izod Notched Impact Strength 23 J/m (0.4 ft-lb/in)   36 J/m (0.7 ft-lb/in)   43 J/m (0.8 ft-lb/in)
Izod Un-notched Impact Strength 123 J/m (2.3 ft-lb/in)   568 J/m (11 ft-lb/in)   Did not break
Water Absorption 24 hours 0.25%   0.3% 1.30% 1.6%
Tg 82°C (180°F) -1°C (31°F) 57°C (134°F) -24°C (-11°F) 19°C (67°F)
Heat Deflection Temperature at 0.46 MPa (66 psi) 79°C (175°F)   48°C (119°F)   51°C (124°F)
Heat Deflection Temperature at 1.82 MPa  (264 psi) 66°C (151°F)   42°C (107°F)   42°C (108°F)
CTE > Tg 107 ppm/°C (59 ppm/°F) 185 ppm/°C (102 ppm/°F) 130 ppm/°C (72 ppm/°F) 226 ppm/°C (126 ppm/°F) 143 ppm/°C (80 ppm/°F)
CTE < Tg 111 ppm/°C (62 ppm/°F) 169 ppm/°C (94 ppm/°F) 161 ppm/°C (89 ppm/°F)   109 ppm/°C (61 ppm/°F)