Booting Up the Printer

 

Power the printer on by plugging it in. You will hear the sound of the tilt tray moving to its home position. This is normal.

  1. The first time you turn the printer on, it will not be activated. The printer display will briefly flash the firmware version it is running and will then show a screen asking you to activate the printer.

Firmware-version.jpg

  1. Each successive time you turn the printer on, it will briefly display the firmware version and then it will show the screen at the right.
printer-ready.jpg

 

After the printer powers on for the first time, you may use the Power Button to switch it on and off. Please see the section Power the Printer On/Off for more information.